SURFLO® AIRJETTM Hi-Flow DC Briushless Motor Drive Electric Air Vacuum Piston Pump
|Free Flow rate(L/M) for air||21|
|Noise level(db)||55db in one meter|
|Materials||PPS and Teflon|
|Inlet diameter and outlet diameter(mm)||ID:4.5mm OD:8.5mm|
3-wires motor connection
|AWG 20 Black||GND|
|AWG 20 RED||M+12~+25V|
|High level input voltage||1.8V~5.5V|
|Low level input voltage|
TO GND SPEED MAX.
|High level input current||65uA MAX. (PWM IN 5V)|
|Low level input current||-65uA~-95uA(PWM IN 0V)|
- High vacuum and large flow rate.
- Strong adaptability to environment.
- High quality and exellent performance.
- Energy saving and high efficiency.
- No leakage and smooth operation.
- Strong suction and high vacuum.
- High pressure.
- Innovative designs and easy installation.
- High temperature performance, good consistency
- Oil resistance and easy installation
- DC brushless motor assembled
- Durable and long life span over 5000hours, low heat.
- Heavy duty work for 24 hours and Continuous operation
Notes of micro air pump
- Do not use this product beyond the limit specified in this
- When using the brushless motor, be noted that the input power
should be constant pressure and filtering.
- Keep the inlet and outlet clean and smooth , no solid particles.
- May contain a small amount of water, not solid foreign objects into
the pump body.
- In inlet and outlet of the non-clean,please install air intake
- The specification of this product is only for your reference
- The specific details should check the real products.
- Products should be made according to customer’s request within the
- Non-professional person should not disassemble this product.
- Long service life at room temperature environment.
- Can supply a variety of certifications according to customer’s
- Please ensure the input voltage meets the specification and make
sure the power polarities are connected properly.
- Connect a filter to the inlet to block dust, fiber,water drops when
the operational environment is worse.
- Use φ4 silicone tube and Connect a silencer to the outlet for noise
- Make ventilation holes or slots on the bottom or side of device
housing for heat dissipating is strongly recommended.
- Use a piece of thick sponge or foam to wrap the pump for
installation would reduce noise and vibration.
- To extend the life time, Suggest to design a control circuit
include a pressure sensor to let the pump work in intervals.
- Pack and Store the pump well in clean, temperature and humidity
controlled place to avoid rusting of motor.
Application of micro air pump
- Electronic products,agriculture,finishing,light industry products
- Analytic-al instruments
- Chemical and production engineering
- Various ancillary equipment
- Medical Electronics: Blood pressure; negative pressure wound
therapy device; oxygen machine; breast pump; the suction machine;
ICU monitor; ozone disinfection; etc.
- Household appliance: Vacuum fresh juice machine; coffee machine;
automatic tea; fragrance machines; dryers; fragrant Irons etc.
- Health Massage: Massage chair; neck massage; aquarium; beauty